Campy square taper BB cup question

[bfd]

OK, I was give what looks like a Record 111mm bb without cups. This is one of the later ones that has a greenish carbon-looking shell and one large bearing on the left side and two small bearings on the right side.

According to the Campy parts manual, it appears this bb requires a left cup of BB-RE313 (Italian) or BB-RE314 (English). But the right side cups come in two favors BB-RE311 (Italian) and BB-RE312 (English) or if you don't mind Chorus, BB-CH313 (Italian) or BB-CH314 (English).

Does anyone know if the cups off the shorter 102mm spindle will work with the longer 111mm bb? According to the Campy parts manual, the 102mm spinde bb uses a left cups BB-RE211 (Italian) or BB-RE212 (English) and a right cup of Record BB-RE213/214 or Chorus BB-CH213/214.

Thanks!

[ultraman6970]

The bike BB shell is the same (per say) and the bearings needs to be confined in the same space so dont see why not, unless the bearings have a different diameter between the 102 and 111.

[Ralph]

I don't know for sure.....but don't see why not. I have one.

The 111 MM asymetrical is for the triple, and the 111 symetrical is for track crank I believe.

102 is the double symetrical version, Chorus and Record, and I don't see why cups would differ.