#1
|
|||
|
|||
1" Threadless AND 31.8 clamp??
I am trying to locate a 1" threadless stem that will take 31.8 bars.
A model name so I can scan ebay more easily if poss., and which I have been doing! I am looking to put bars with a flat top on my 1" threadless commuter. Note: Right now I am staying away from shims if at all possible. It's kinda obvious that solution exists so...let's let that be. If someone knows the name of a model that would be greatly appreciated. I think I saw a listing on ebay that specialized made one. At some point 3T or ITM must have, but a model name would make searching one out so much easier! Thanks in advance! |
#2
|
|||
|
|||
Any reason a 1 1/8 with the shim won't work for you?
|
#3
|
||||
|
||||
i think that the stem your are looking for does not exist. when deda invented the oversize standard they were already making newton stems and they were already 1.125 with a shim.
could be mistaken.
__________________
please don't take anything I say personally, I am an idiot. |
#4
|
|||
|
|||
I think bicycletricycle is correct.
I had a 1" threadless 31.8 stem but it was a circle A custom. I broke the bolt and destroyed the stem while riding so I just shimmed and can't tell the difference. |
#5
|
|||
|
|||
Im pretty sure that you'll find no one has produced that combination of stem as the 2 standards came about at completely different times.
If it's a nice bike go custom, if not use a shim. |
#6
|
||||
|
||||
also, i support your shim reluctance, I'm morally opposed to shims (mostly)
__________________
please don't take anything I say personally, I am an idiot. |
#7
|
|||
|
|||
I saw an ebay listing from Proscloset, of a 1" 31.8 stem just recently - so unless they got it wrong? Plus, I swore I saw one, randomly, about a year ago.
(forgot to bookmark it!) I am thinking maybe there was some overlap (very little) of a new standard being phased in with a few stems being made for older bikes, until you bought a new one with 1 1/8" technology. There<s an FSA up now, as well as some cheap stems fro Poland at $16D - just looking for alternate models as the FSA is 70mm Last edited by canadasteep; 12-01-2015 at 04:38 PM. |
#8
|
|||
|
|||
There's a thread on the internet-BOB list about this very topic right now. This popped up:
https://wearefactoryfive.com/products/f5-titan-stem HTH... Edit: Eh... poked the wrong link in my daily digest. What are the chances that a thread about 31.8/1" quill would be followed immediately by a thread about 31.8/1" threadless? Mods, feel free to delete... Last edited by smontanaro; 12-02-2015 at 07:59 AM. |
#9
|
||||
|
||||
concur. 99.9% of people with this need use a shim.
|
#10
|
|||
|
|||
I use a Thomson X2 stem with a Thomson shim on one of my bikes and it works fine. There is nothing wrong with it.
|
|
|