#16
|
||||
|
||||
the hanging racks that hold the top tube with rubber straps seems like they would definitely damage the paint if you have a brake cable run along the top tube...
__________________
http://less-than-epic.blogspot.com/ |
#17
|
|||
|
|||
Rack
Great, you guys are big help!!!! I am looking at Kuat and 1up platform... Thank you! Riding today with cool weather........
|
#18
|
|||
|
|||
The bike cradles usually have relief cuts in them for the cable to sit in without resting on the tube, at least the better hanging style racks and my older Thule are like this. If you mean in cases where the cable runs on the top of the top tube, then all bets are off and it will rub unless you put something under the cables. Platforms are still usually better at holding the bikes, they just take up more room and are more $$.
|
#19
|
|||
|
|||
Rack
Quote:
|
#20
|
|||
|
|||
Agreed - the hanging racks do scratch the frame if there are external brake cables on the top tube. Happened to me once and I successfully polished the scratches out. Since then I've always kept a small piece of bike tube handy which I slide in between the cable and the frame before putting the bike back on the carrier. Ideally I don't use the hanging rack but when the roof rack is filled with bikes I drag the rear mount rack out of the shed as well.
|
#21
|
|||
|
|||
Quote:
See this for more information (or confusion?): http://forums.mtbr.com/cars-bike-rac...t-1055205.html |
#22
|
|||
|
|||
Quote:
|
#23
|
|||
|
|||
Quote:
|
#24
|
|||
|
|||
Bike Rack
I have a Kuat NV (found at slight discount on Craigslist) that I love, it is 4-bike set-up for a 2inch hitch. It is easy to load and has a great mechanism to tighten it in the hitch. I liked it so much I bought a 2-bike Kuat Transfer for other car with 1.25inch hitch. Every so often Backcountry.com has a 20% off coupon for one item, so can bring the price down.
A good friend has a 1up and generally liked it too. None are perfect, but I agree that Kuat and 1up are great. |
#25
|
|||
|
|||
You won't be disappointed. Kuat's build quality is first rate.
|
#26
|
|||
|
|||
I can understand why people might be put off with what seems to be a fight between former co-workers/owners or copyright infringement. It may be a fight of a developer against a copier.
That said, the site with the hyphen (1up-usa) in it has the EXACT products that I have and think are fantastic. Importantly, it is the only that uses the registered trademark on the product shots which is the same as the one on what I have. If you look at the other site, they do NOT use the protected trademark. There is surely a legal reason that the other site does not use the registered trademark. Oh, and the hyphen site physical address is the same address as where my stuff came from. The other site is in a completely different town. So, I am not a lawyer but I am an educated consumer. And I will say again that the product is baller.
__________________
Jon Last edited by htwoopup; 09-23-2017 at 08:34 AM. Reason: typo |
#27
|
||||
|
||||
For my CT, I went with a roof rack. I thought the 1.25" hitch was a bit small. No matter how beefy the rack is the overall setup will still vibrate and wobble.
|
#28
|
||||
|
||||
Quote:
A hitch mounted tray rack does not vibrate or wobble That said a CT is low to the ground and that means unless you are careful you will bottom a tray hitch rack and hear that nasty grinding sound unless careful. I have a 2012 CT and use other vehicles for bike transport. If i was using the CT the bike would go inside |
#29
|
|||
|
|||
Quote:
|
#30
|
|||
|
|||
Quote:
|
|
|