#1
|
|||
|
|||
Open Upper
For a while, I’ve been thinking of a one-bike solution. At least for gravel and road. I don’t race nor do I ride with super fast guys. 95% of the time, I ride alone because no one wants to get up at 5am to ride with me.
I typically ride mostly road although there are a few gravel sections I could take as an alternative. I do some gravel through the season. Probably 80/20 road/gravel split. I was looking at various frames. Crux, Domane, even Carbonda. An Open Upper frameset came up in a local classifieds for $1,600. Minimal miles. Looks to be in great shape. From the reviews and geometry, it appears to be basically a fat tired road bike. I think this would fit exactly what I’m looking for. Maybe 700x32 for road rides. And 40’s for gravel (or even 650b x 55). Anyone own one? |
#2
|
|||
|
|||
Too bad you aren't in London, I know someone who wants to sell a fully loaded Open WI.DE
|
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
I was in the same boat as you and decided on a Crux. I don’t regret my decision at all and the bike is plenty fast with 32mm tires. I’ve read and heard that the Upper is slightly more “road” compared to the Crux so I’d imagine that it would be exactly what you’re looking for.
|
#5
|
||||
|
||||
Quote:
I currently have the frameset for sale if you are a large (56cm) - only selling because I have too much overlap with a Domane, Vamoots and Routt. Mint shape (no scratches or chips) - PM if interested. There's pics built-up in my gallery (see signature)
__________________
My Bikes |
#6
|
|||
|
|||
Thanks all. I think I will pick it up. The only thing I don’t like is the PFBB but I’ve had good luck using Wheels Mfg thread together BB’s on other bikes.
velo - I’m a medium/54. Thanks though! |
#7
|
||||
|
||||
Quote:
Good move. I use an UP as my main road bike in similar ways. I bet you will like it too. |
#8
|
|||
|
|||
I picked it up. Very stoked to get it built up.
This is my first bike with internal routing. Since I’ll be running Stam AXS, I just need to worry about brake cables. Is it recommended I use those foam noodles for noise/rattle control? |
#9
|
|||
|
|||
I would use those foam noodles ... makes sense.
|
#10
|
||||
|
||||
Nice bikes.
Have fun. |
#12
|
||||
|
||||
Any advantage over extended zip ties or just another product to purchase?
__________________
Marc Sasso A part of the resin revolution! |
#13
|
|||
|
|||
Quote:
I also just ordered BTLOS wheels. They’re offering free FedEx shipping so hopefully will be here soon. I’ve got everything else except cranks, rotors, and BB. |
#14
|
|||
|
|||
Few words of caution
-chain drop is a known issue with this frame. Make sure you use a keeper and put a lot of protection along the DS BB or you’ll mangle the carbon (ask me how I know )
-brake hose bending at the DT can get tight and lead to hose damage. They even tried to blame it on Campy when it’s clearly a design issue. Just take a lot of care when building up and check the hose for kinks -seatpost clamp hardware is kind of odd - very easy to bunch up the very thin carbon unevenly. Might make sense to invest in a more robust clamp -fork and rear triangle lateral stiffness is a bit lacking. Can cause but more brake rub then expected when really grinding out of the saddle and putting down lots of watts at lower cadence. Also if your running minimal tire clearance (any less than 4mm front or back) then the tire can run the fork and chain stays. Other than that if the geo works for you it’s a moghty fine riding frameset. |
#15
|
|||
|
|||
Quote:
https://wheelsmfg.com/386evo-abec-3-...nks-black.html I found these Red crankset with 46T for a good price as well. I figure this will be a good match for the 10-46 XPLR rear. Should be plenty for road and steep gravel climbs. https://planetcyclery.com/sram-crank...waAu_iEALw_wcB |
|
|