SRAM eTap Compatibility Questions

[Alistair]

Originally Posted by Vientomas

Thanks again for all the insight. I was not aware that both shifters were required for 1x.

Yep.

SRAM has one button on each lever. The normal programming is right-click -> smaller cog, left-click -> bigger cog, both-click -> chainring change (or nothing if 1x).

Shimano has two buttons per lever, so you can run a left lever without Di2 if you're running 1x. And the new Di2 is partially wireless, so might work for the travel use-case (battery in seat post is wired to RD, but levers are wireless and use coin-cells for power). But I don't know if any 12s Di2 groups have cable brakes.