#1
|
|||
|
|||
Ok, what to do... advice?? Campy related :p
Eurus (OS hub) wheel came with a shimano FHB... a new FHB depending where I get that will be like 100 bucks that I dont have... a conversion cassette is almost the same...
The other option is to trade it for a campagnolo one here at the forums maybe? Sell the wheel? |
#3
|
|||
|
|||
Ok, what to do... advice?? Campy related 😛
Same here... 11sp will run flawlessly regardless. I have S11 freehub body on my Record hubs and use an Ultegra cassette with Chorus 11 and it shifts beautifully.
|
#4
|
|||
|
|||
Sadly I want it for 10 speed... but hmm... I could save the wheel when i move to 11 but will take like years to do it hehehe
|
#5
|
|||
|
|||
Quote:
In my experience, the Veloce cassette shifts just fine, it lasts pretty long, and it's pretty inexpensive. I think the price is comparable to 105 or Ultegra 10s cassettes, something like $40-50. And I can confirm that even though the Veloce cassette is all loose cogs, it won't gouge an alloy freehub body. You can't say the same about Shimano (although the gouges can be filed down). |
#6
|
||||
|
||||
Used 1st gen Campy 11 spd levers and a 105 level cassette would get you there, for $200 or so, probably... perhaps even less.
__________________
Old... and in the way. |
#7
|
|||
|
|||
I used a jtek before with an 11 lever over 10 cassette, worked fine... I think gonna have to bite the bullet and buy the freehub body... so guys buy the stuff I have for sale! :P
Anybody needs a shimano FHB?? with the lockring obviously... |
#8
|
||||
|
||||
I may have another freehub here in addition to the Eurus wheel we talked about. To be clear, I know I have a freehub but am not sure it's the right one.
|
#9
|
||||
|
||||
If it's for the oversized aluminum axle(BIG hole for axle, not 12mm for steel or ti), it will fit onto that aluminum axle..both the older Campag FH body and new 'lobed' one fit onto either axle..the new FH body does not fit onto older axle.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#10
|
|||
|
|||
I know there are like 2 models FH-BO015 and the FH-Buu15, one is the upgrade of the other one but are interchangeable. Looks like the BUU is the upgraded part and now that one is listed as 9/10/11 speed while the 0015 was listed only as 9/10 and we all know that as long as it works with it will work with 11 aswell.
I believe 2006 is the year campagolo did the upgrades to some line up of wheels, this takes me to this. and what happens to the record black hubs? those are OS, they use this same FHB parts right? Oliver, will email you tonite... |
#11
|
||||
|
||||
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#12
|
||||
|
||||
Quote:
Were the changes made to address the cracking problem? |
#13
|
|||
|
|||
Man this is so confusing sometimes Because one source can say something, other one says another and since IMO campagnolo screwed up again as usual making the stuff slightly different all the way between models and years, this can get really confusing
For example this... https://thecycleclinic.co.uk/product...-os-alloy-axle |
#14
|
|||
|
|||
I think the only way to know what I need is to check out that darn axle... well that will happen tonite, gtg to work now :/
|
#15
|
||||
|
||||
Quote:
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo Last edited by oldpotatoe; 09-14-2017 at 08:59 AM. |
|
|