#16
|
|||
|
|||
I really like the white industries CLD hubs. They look great, and the titanium free hub means I can cheap out on cassettes.
|
#17
|
||||
|
||||
Another pitch for DT350..same internals as DT240 with a wee bit heavier shell, assembled in Asia(Asian made shell in DT factory) and mucho less $.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#18
|
||||
|
||||
DT240 = Dura Ace
DT350 = Ultegra I have both types in my wheels but personally, I prefer Ultegra.
__________________
🏻* |
#19
|
||||
|
||||
yea, i dont know anything about disc, but i have a lot of miles on DT350. just rode D2R2 and Dirtphalt on some DT350 wheels and they just keep going. I love how easy they are to pull apart and check the ratchet rings. very appropriate for a do-it-all bike.
i put 54t ratchets in mine, because i like 'em loud
__________________
http://less-than-epic.blogspot.com/ |
#20
|
|||
|
|||
Quote:
Not sure why you wouldn't want to use SRAM's rotors with SRAM calipers. Certainly you can mix and match, but I see way more Shimano calipers using Centerline X rotors than I do SRAM calipers and Shimano rotors. I guess this probably has to do with the lack of availability of Shimano's highest end rotors in 6-bolt configuration, but never looked into it. I also think the newest high end Shimano rotors are pretty garish looking. And the DT hub comes with their own centerlock to 6 bolt adapter and lock ring which is thru axle compatible. I did NOT change the pawls in my hub because I do not like them loud. My 350 is not Shimano quiet, but not bad at all. You're factoring the hub weight into this? Or you're suggesting using 6-bolt rotors on centerlock hubs with an adapter? Last edited by ColonelJLloyd; 10-19-2017 at 08:31 AM. |
#21
|
|||
|
|||
Another vote for White Ind CLD. Their customer service is exceptional, the build quality solid, you don't need proprietary tools to overhaul (unlike CK) and I personally am much more of a fan of the ti freehub body (vs. the aluminum on I9)....
|
#22
|
|||
|
|||
I have DT 240 and 350 hubs on two wheel sets for my road bike as well as a set with Alchemy ORC hubs.. The DTs are fine. But I do prefer the alchemy hub as I can definitely feel a difference in the flex in the rear wheel, which I attribute to the wider bracing angle of the Alchemy hub as the rims and spokes are the same. Seems like DT hubs have some of the narrowest flange spacing in the business.
DT not out of the running. Lots of love for the White hubs here. So. Flange spacing data for boost.. I’ll just list flange to right distance. DT 22.4mm WI. 22.5mm Project 321 24mm CK 24mm I9. 24.5 I’d had a long conversation with Jeremy at Alchemy years ago that sold me on flange spacing for wheel strength. Which seemed consistent with a progressive loss of wheel strength as we went from 7 speeds to 11. Am I just way overthinking/underthinking this? I’d get the I9 in a heartbeat if it were not for my desire for silence. It wins on flange spacing. Has some history. And, it does come in pink. But I think it’s the loudest of the bunch. Noise level by hearsay only Loudest = I9 >CK>DT=WI>project 321 quietest. More thoughts? Jon |
#23
|
|||
|
|||
I don't get why you're considering Boost spacing. There won't be any non-custom wheelsets you'd want to use with <2" tires. Sure, the dish is better, but it's not like the current options aren't working out just fine.
|
#24
|
|||
|
|||
Good question.
My thoughts are that this the direction that all road bike segment are going. It’s a custom bike that will be a 50th bday thing for me. I dont mind spending the money for a couple of nice custom wheel sets. I guess it is a “why not?” sort of question. The only downside that I am seeing is possible chain line issues. But, I could be wrong. I often am! Hmmm, maybe I just got confused on noisy vs 142mm. Let me reevaluate. Jon |
#25
|
|||
|
|||
Yeah, I think you're confused. ZERO gravel/road bikes are going Boost. Boost spacing requires a different chain line so different cranks. The only cranks designed with Boost spacing in mind are 1x MTB cranks.
|
#26
|
||||
|
||||
Before you decide on a rear hub, consider your choice of cranks. Do you want to run road cranks or MTB cranks. If you're sticking with road cranks, 135/142mm spacing is the safest bet.
Up until recently all of my personal gravel rigs have utilized 135mm rear spacing. I'm in the process of building up a drop-bar adventure/gravel-plus bike that uses 148mm (aka, Boost) spacing, but it's closer to an MTB than a traditional gravel/road setup.
__________________
GRAVELBIKE.COM - ride everything |
#27
|
|||
|
|||
Definitely staying road cranks. This bike will also see duty as an inclement weather road bike (at least as inclement as we get here in Monterey). Will have a second wheel set with 27-28 mm tubulars.
Now with 142mm axle center to right flange distance. I9. 17mm Project 321 21mm Chris King 20.1mm DT 19.4mm White industries 19mm. All pretty close except I9. Also, all of them (except I9) exceed the 17-18mm dimension of most 130 mm road hubs. So, would expect stronger wheel. Still undecided... but at least I’m a bit more clear on what I’m looking at Thanks for all your opinions and getting me on the right path! Jon |
#28
|
||||
|
||||
White Industries or Industry Nine hands down...
both very serviceable and convertible both have hot shades of pink too
__________________
Ride always, Ride Often |
|
|