semi-OT: anyone know of a place to have simple parts machined/printed

[charliedid]

What's this made for, some sort of tool?

[C40_guy]

Originally Posted by wallymann

surprisingly roughly finished. like...terrible.

ID was on the tight side, needed to open it up with my lilliputian 3-jaw chuck and file. OD was fine, just really rough.

Wonder if there was a "fine finish" option in the ordering process...

[wallymann]

adapting a BB facer to also face HS.

https://forums.thepaceline.net/showthread.php?t=304268

Originally Posted by charliedid

What's this made for, some sort of tool?

[unterhausen]

That is worse than I thought it would be, I wonder if waterjet would be better. I was thinking about having them make me something thicker, thanks for posting, now I'll do something else.

[rccardr]

Wow. That looks nasty.

[ChainNoise]

Originally Posted by unterhausen

That is worse than I thought it would be, I wonder if waterjet would be better. I was thinking about having them make me something thicker, thanks for posting, now I'll do something else.

The cut on the outside looks almost exactly like a water jet cut with a heavily worn nozzle. But the massive burr has.me thinking otherwise.

[Black Dog]

Originally Posted by ChainNoise

The cut on the outside looks almost exactly like a water jet cut with a heavily worn nozzle. But the massive burr has.me thinking otherwise.

Looks like what you said. The burr would not be unusual on the downstream end with a bad nozzle.

[audiisaac]

I can turn you one if you still need it

[wallymann]

Originally Posted by audiisaac

I can turn you one if you still need it

oh, just some light finish-work...and it's fine...thanks!