#1
|
|||
|
|||
Convert n3w rapid red carbon wheels to xdr?
What exactly is needed to do this? I’ve n3w and want to move to xdr but am uncertain which part or parts are needed.
The wheels I have: https://www.fulcrumwheels.com/en/whe...PID-RED-CARBON |
#2
|
|||
|
|||
If you are going from N3W to XDR, you need an axle swap..
https://adapters.fulcrumwheels.com/?id=1 Excellent wheels though - and worth the effort, atmo.
__________________
Io non posso vivere senza la mia strada e la mia bici -- DP |
#3
|
|||
|
|||
Should just be a standard Campy XDR freehub body, If so, I've got a couple of them that are barely used. They've been sitting in a drawer for about 4 years now.
|
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
The Fulcrum Rapid Red Carbon has the 17mm axle already, so you just need kit # FC-R0-126, this is the XDR driver, plus corresponding washers/spacer for retrofit on the axle.
As far as the how to: https://www.campagnolo.com/ca-en/sha...LCARBONDB.html Look at the technical documents OP004, page 7 covers the Campagnolo freehub swap process (the hub specs are the same for your Fulcrums) |
#6
|
||||
|
||||
Not the R0-202?
I lack confidence, but this is what I see listed in the Rapid Red Carbon documentation. I probably shouldn't even post, but I'm gonna anyway. Last edited by feynman; 05-20-2024 at 03:33 PM. |
|
|