Campy EPS power unit extension ... How long??

[Charles M]

Anyone know how long the EPS extension cable is (the internal routed extension that will allow the charge port to be blaced further away from the power unit) ??

[tigoat]

Originally Posted by Charles M

Anyone know how long the EPS extension cable is (the internal routed extension that will allow the charge port to be blaced further away from the power unit) ??

Does the length matter? If it is a little long then just stuff the excess into the frame. Actually, it might not be long enough if you place the charger head furthest away from the power unit, which I don't think would be the case here. Approximated by the picture, it looks to be in the range of 14-16" long, which should be adequate to route to the chain stay or seat tube.

[oldpotatoe]

Originally Posted by Charles M

Anyone know how long the EPS extension cable is (the internal routed extension that will allow the charge port to be placed further away from the power unit) ??

I'm guessing about 35cm..or so...but a call to Jerry or Dan Large at Campagnolo, NA, they will know.

[Charles M]

I have an email in to Dan... we'll see. I need 40.

[oldpotatoe]

Originally Posted by Charles M

I have an email in to Dan... we'll see. I need 40.

53cm, from Jerry at Campagnolo NA

[Charles M]

BINGO... I needed an extra 40.

[oldpotatoe]

Originally Posted by Charles M

BINGO... I needed an extra 40.

Congratulations on getting the far superior, Campagnolo, EPS gruppo..you will like it!