#1
|
||||
|
||||
Campy EPS power unit extension ... How long??
Anyone know how long the EPS extension cable is (the internal routed extension that will allow the charge port to be blaced further away from the power unit) ??
__________________
charles@pezcyclingnews.com |
#2
|
||||
|
||||
Does the length matter? If it is a little long then just stuff the excess into the frame. Actually, it might not be long enough if you place the charger head furthest away from the power unit, which I don't think would be the case here. Approximated by the picture, it looks to be in the range of 14-16" long, which should be adequate to route to the chain stay or seat tube.
|
#3
|
||||
|
||||
I'm guessing about 35cm..or so...but a call to Jerry or Dan Large at Campagnolo, NA, they will know.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#4
|
||||
|
||||
I have an email in to Dan... we'll see. I need 40.
__________________
charles@pezcyclingnews.com |
#5
|
||||
|
||||
53cm, from Jerry at Campagnolo NA
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#6
|
||||
|
||||
BINGO... I needed an extra 40.
__________________
charles@pezcyclingnews.com |
#7
|
||||
|
||||
Congratulations on getting the far superior, Campagnolo, EPS gruppo..you will like it!
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
|
|