#1
|
||||
|
||||
Di2 only shifting to higher gears
Crashed on Monday on the drive side. Rode home with no issues but noticed tonight that dear der barely rubbed spokes in the lowest gear. So I grabbed the rear der to see if the hangar was bent (not scientific obviously) to try and tweak the rear slightly away from the spokes.
Now it only shifts to higher gears and won't shift into lower gears at all. So what did I dork up? |
#2
|
|||
|
|||
Went into 'safe mode'. Make sure the etube cables into your shifters are still seated properly. Also, have you tried going into the adjustment mode?
|
#3
|
||||
|
||||
I believe you hold the adjustment button on the junction for like 5 seconds, it'll shift the RD a bunch and you should be good to go.
|
#4
|
||||
|
||||
What they said. And get that hanger straightened or replaced now, preferably replaced. Bent hangers almost always fail later.
|
#5
|
||||
|
||||
Yep that did it...thanks.
Still slightly rubs the spokes so I need to get that sorted. |
|
|