#1
|
|||
|
|||
SRAM Yaw chainrings with a Shimano FD
Any concerns here? Just checking before I dig into this too deeply.
For reference it is a set of 46/36 rings with a 5800 front derailleur. Crankset is a Ritchey WCS model. Thanks! |
#2
|
||||
|
||||
They will work fine.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#3
|
|||
|
|||
Hey Ol Spud,
Along these same lines ( but reversed and apples to oranges ) will a 10 speed Shimano crankset work with an 11 speed Shimano chain and a SRAM 11 speed yaw front derailleur? As always, thank you for your knowledge and generosity!
__________________
Livin’ the dream ( just like Mike ) |
#4
|
|||
|
|||
11 speed chain will work with any speed below, given it's Shimano/SRAM and not campy.
I tried a 10speed ultegra 6750 crank on my Force22 yaw FD and while the shifting wasn't as good as the ultegra FD it worked just fine. And by saying shifting wasn't as good, the shifts were a little less "crisp" but what I did like was not needing to trim AT ALL once the shift was made. You should be fine with the Yaw FD on whatever crank and chain you decide on. Good luck. |
#5
|
|||
|
|||
Thanks old potatoe!
|
#6
|
|||
|
|||
Got it working; we are golden!
Pic for funsies... Last edited by gt eunuch; 07-21-2017 at 08:14 PM. |
#7
|
||||
|
||||
Quote:
You ok?
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo Last edited by oldpotatoe; 07-22-2017 at 07:35 AM. |
#8
|
|||
|
|||
Moment of weakness...
__________________
Livin’ the dream ( just like Mike ) |
|
|