#1
|
||||
|
||||
enve integrated stem for cross or other canti users
ran across this and thought it was kinda cool.
http://prollyisnotprobably.com/2013/...-with-enve/#10 |
#2
|
||||
|
||||
enve integrated stem for cross or other canti users
Did you see the price? $550 for the limited edition, $350 for the regular.
Lol. Len Sent from my iPad using Tapatalk HD
__________________
"Evil.....is the complete lack of Empathy!" "One of the largest obstacles to seeing truth......is wanting something too much." |
#3
|
||||
|
||||
I don't understand how turning wouldn't mess with your brake. Am I missing something?
Last edited by nighthawk; 01-31-2013 at 10:36 PM. Reason: FU auto-correct |
#4
|
|||
|
|||
Quote:
I think a better approach is a fork mounted hanger. |
#5
|
|||
|
|||
you stem is always aligned with your fork, where the brake is mounted..... so when you turn everything turns together.
|
#6
|
|||
|
|||
cool, but i don't see how it would help with chatter/shudder.
could definitely help with cable/housing routing if you 'slam that stem' or have a short headtube. i thought the cure for that (barring a swap to stiffer fork/steerer) has generally been to have the lower housing stop as close to the yoke as possible - that's why companies started making fork crown-mount stops... see the Specialized Crux, Tektro makes one aftermarket if your fork is drilled. Ruckus Components modifies carbon forks to integrate a stop - i've seen this firsthand on a couple forks locally, very cool. Last edited by gavingould; 01-30-2013 at 08:38 PM. Reason: because i said so |
#7
|
||||
|
||||
Why not just have a roller, a la vintage Salsa stems?
I worked on plenty of bikes with stems like this back in the late 80's early 90's that routed the brake cable through the stem one way or another. The annoying problem with this on a quill stem is that anytime you move the stem you have the additional job of re-adjusting the brakes as well. Not sure this is a huge jump forward technologically, but hey, different strokes for different folks I suppose... |
#8
|
|||
|
|||
I have this setup on my SV cross bike and have had zero issues. It just looks clean.
|
#9
|
||||
|
||||
Ha! Right, duh. For some reason I wasn't visualizing it since the fork wasn't in the picture.
|
#10
|
|||
|
|||
Quote:
P.S. I hate how stem spacers stick out over the stem bore on Enve stems. Looks mushroom-y |
#11
|
||||
|
||||
Quote:
Have I drilled a couple of holes into a stem to accomodate housing and the cable ala this? yes I have. BIG beefy, thick stems that aren't gonna brake. W/o a fork mount for a cable stop or using V Brakes, sometimes all you can do if you don't have any steerer left to put in cable stop/hanger. Last edited by oldpotatoe; 01-31-2013 at 08:00 AM. |
#12
|
||||
|
||||
Assuming you mean at the crown. Or at least a hole for mounting one there.
-g |
#13
|
||||
|
||||
That's attractive enough to sell a lot of mini-Vs!
|
#14
|
||||
|
||||
#15
|
||||
|
||||
Quote:
Len
__________________
"Evil.....is the complete lack of Empathy!" "One of the largest obstacles to seeing truth......is wanting something too much." |
|
|