Shameless self promotion..Cyclingtips-Bikes of the Bunch

[oldpotatoe]

Originally Posted by 91Bear

What is that screwed into the shifter bosses? Something homemade?

Remnants of a Veloce cable stop, just the plastic body..

[numbskull]

Very nice that there is a connection between the bike you love and people you love most.

[RFC]

Very nicely done!

Congratulations to both of you!

[mktng]

Haha! That's a great retro / modern build. I didn't study the pics enough. But how was it drilled out to accommodate internal wiring? How was it routed?


In regards to the BB area. Cables just run through and under the crank axle? Then fed down the chain stay?

Very neat


Sent from my A0001 using Tapatalk

[oldpotatoe]

Originally Posted by mktng

Haha! That's a great retro / modern build. I didn't study the pics enough. But how was it drilled out to accommodate internal wiring? How was it routed?


In regards to the BB area. Cables just run through and under the crank axle? Then fed down the chain stay?

Very neat


Sent from my A0001 using Tapatalk

Yes, first step after hearing from frame builders, pulled BB to see if BB end of seat tube, downtube and RH stay 'open' to run wires. Yup so 5/16 drill. Dental floss with nipple on end...hole by headtube to hole under bottle cage, hole under cage to hole in RH stay, etc, tie connector onto dental floss, pull wire thru, etc.

Ran battery wires under BB EPS cage, to ders.

[Llewellyn]

What a great read.

[rounder]

Good story!

Peter walks it like he talks it.

[choke]

It seems that Campy approves as well.... (the ow link goes to the story)

[nobuseri]

Props! A nice read; I like the attention to detail in the writeup. Nice pics, too. Bike build is a good mix of old and new. Haven't had a chance to ride a Leader yet, but from what I hear, they are the real deal.

[KarlC]

Love this retro mod build, such class done right for everyday enjoyment