#1
|
|||
|
|||
Zonda freehub question
To change a Zonda with a Shimano freehub to a Campy freehub is it just a simple freehub swap or do I have to do something else?
Thanks Jack |
#2
|
||||
|
||||
Easy, old off, new on. All on FH side, don't even have to muck with axle.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#3
|
|||
|
|||
I also have a question about the freehub part number compatibility. When I look at the Campy website parts manuals they show the same part number for the years 2012, 2013, 2014. The older wheels have a different freehub part number. My wheels are 2013. I'm wondering if the part number change was for 11 speed use.
So my question is, will freehubs only from 2012, 2013, 2014 fit my wheels? Thanks Jack |
#4
|
|||
|
|||
There's a difference in the axle shape on later hubs (post 2009?)…the round axle freehubs will fit all models…the lobed axle freehub will not fit onto the round/older axle.
If you have newer (lobed axle) hubs then just get the current free hub body… All are 11s compatible, though. -Mark in St. Louis Quote:
|
|
|