#46
|
||||
|
||||
I recently had a 4 way Blendr to gopro adapter made by a gent on ebay. Set it up with 2 lights to retake some real estate on my handlebars. Highly recommend working with this guy for custom stuff.
https://www.ebay.com/usr/nice_used123? edit: not sure why imgur photos not showing up, here is the album: https://imgur.com/a/fTQJlrJ |
#48
|
||||
|
||||
Amazing! PM sent, thank you!
|
#49
|
||||
|
||||
Work in progress, but I'm printing up a few SRAM eTap AXS battery blocks for some racers who race a geared bike in the SSCX Race.
Last edited by kppolich; 11-10-2022 at 10:53 AM. |
#50
|
|||
|
|||
Quote:
That's pretty cool! Are you going to paint them or leave them black? |
#52
|
|||
|
|||
Quote:
nice! if you are selling them at some point I may be interested in buying one. |
#53
|
||||
|
||||
3d printer to the rescue once again. I need to ship some hydro levers/calipers that required me to cut the line to remove. Anyone who has shipped hydro stuff knows that the lines are kind of tricky to cap off, no matter if it's DOT or Mineral Oil. Tape doesn't want to stick, so I fired up the 3D printed and made some caps with plugs.
5mm outer diameter with a 1.4mm plug |
#54
|
||||
|
||||
This one is timely. Appreciate the solution as the sram plugs I’m using in my shimano hoses still leak a bit.
__________________
|
#55
|
||||
|
||||
5 minute design, 10 minute print and I now have a solution for removing old SRAM Barb/Olives from their hoses without forcing me to cut them.
Success today with this crude 2 piece clamp, but a lifesaver on an internally routed bike (Tarmac SL7) and $100 hoses. Basically, clamp this on the hose, use the T8 key to unscrew the whole thing (Barb + Olive). I clipped the very end of the hose off to get a fresh end to work with, but its better than losing a few centimeters. Last edited by kppolich; 03-03-2023 at 02:23 PM. |
#56
|
||||
|
||||
Tacx T2094.08
|
#58
|
|||
|
|||
We have a series of pegboard tool holders for some of our tools we're going to show at Sea Otter. Download them for free and print at home. If anyone wants them early, drop us an email and we can send them across.
|
#59
|
|||
|
|||
Woah I thought I was clever with my printed dynamo mount. These are all next level...
|
#60
|
|||
|
|||
|
|