|
|
|
|
#1
07-27-2017, 04:50 PM
|
||||
|
||||
|
Guy walks into LBS, is he nuts?
Getting around to putting headset back together. I had cleaned & lubed parts a few weeks ago. In the meantime the parts bins undergo a bit of resorting. Unnecessary but so rewarding.
Well of course I misplaced the lower crown race. I wait a few days thinking where it went will materialize in my aged brain. Another round of looking while remaining fairly calm & admiring my resort skills. Off to the LBS for a 1 1/4 crown race w my 45/45 degree bearing in hand. Is it too much to think a big bike shop would have such a thing? It used to be easy to get small parts local. Maybe there is too much diversification of parts to fit so many standards that its too much too expect? But then they couldn't even figure out what to order! Sent from my iPhone using Tapatalk 
|
|
#2
07-27-2017, 05:06 PM
|
||||
|
||||
|
1 1/4 is kind of an odd size. I think you need this:
http://www.ebay.com/itm/Cane-Creek-1...8AAOSwuVdZcmaf
|
|
#4
07-27-2017, 05:17 PM
|
|||
|
|||
|
Quote:
|
|
#6
07-27-2017, 05:44 PM
|
||||
|
||||
|
I wasn't even aware of 1 1/4 integrated headsets. I've had numerous frames that take 1 1/8 integrated but thought most companies went to 1 1/2 x 1 1/8.
|
|
#7
07-27-2017, 06:45 PM
|
|||
|
|||
|
when I saw that they were trying to get road bikes to use 1 1/4", I thought it made sense. It probably does make sense, but 1 1/2" seems to have taken over anyway. Or rather, 1 1/4" failed to supplant 1.5 on road bikes.
|
|
#8
07-27-2017, 07:02 PM
|
|||
|
|||
|
Bike shops no longer sell parts. They sell lifestyles.
__________________
http://hubbardpark.blogspot.com/
|
|
#9
07-27-2017, 07:19 PM
|
|||
|
|||
|
LBS' are "damned if you do, damned if you don't" stocking parts like this.
|
|
#11
07-27-2017, 08:19 PM
|
||||
|
||||
|
Quote:
Yes, done that before :-). No 'luck' in this case. Ok, I learned something, so some slack on this one. That they couldn't figure out what to order, not so much. As pointed out, I found it on ebay in a matter of seconds. Prolly for 1/2 the cost & here in two days. Sent from my iPhone using Tapatalk
|
|
#12
07-27-2017, 08:24 PM
|
||||
|
||||
|
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo
|
|
#13
07-27-2017, 09:15 PM
|
|||
|
|||
|
They're not going to have a room full of those awaiting someone to come looking for one. Especially in Kansas. Anyone that does is on the express to going out of business
Be patient and not an immediatist and you'll have one in your hot little hand in a day or 3. QBP is like a day away, and they have everything like this. Just in time is the phrase of the day PS: Merlin and Wiggle won't have it either...and they won't pour thru a catalog to find just the widget you need
|
|
#14
07-27-2017, 09:48 PM
|
|||
|
|||
|
QBP put in a new warehouse in Lancaster, I asked for something one afternoon, next afternoon I had it in my hands.
|
|
#15
07-27-2017, 09:57 PM
|
||||
|
||||
|
Guy walks into LBS, is he nuts?
Quote:
Not to disagree w the main theme here, but we do have major metro area in KS. And my online source had a hot little number for me in minutes w the same bearing dimensions the LBS was using to no avail. So I get my $10 widget & they keep getting the business. Sent from my iPhone using Tapatalk Last edited by Jgrooms; 07-27-2017 at 10:01 PM.
|
 |
|
|
Linear Mode
