#1
|
|||
|
|||
Shimano x Paul Thumbies 2x11?
Has anyone built or seen such a combination? Found some Shimano Thumbies in the bin and have machinations of turning the Elephant NFE into a flat bar basket build. Ideally I could still use the CX70 front derailleur and a new GRX 810 rear derailleur which I already have. The Thumbies would be a nice addition to the cockpit versus some ugly Shimano mtb shifters.
|
#2
|
|||
|
|||
I used Dura Ace 11 speed bar end shifters on Paul mounts.I used an Ultegra RX800 rear derailleur, with a CX70 front derailleur and everything worked great..John
|
#3
|
||||
|
||||
I did the same with 9-speed and Paul Love Levers (I think they areā¦) - works great!
__________________
www.hampsten.blogspot.com |
#4
|
|||
|
|||
I ran thumb shifters then thumbies for years. Then I went 10sp and 1x
Haven't ridden 11sp, but the rest that I've had have been great M |
|
|