#1
|
||||
|
||||
Anyone familiar with Sync or Torus technology carbon wheel construction?
Viewed these wheels https://customlux.com/ at a trade show by a company out of Quebec, Canada, Apogee and not being very knowledgeable on carbon wheel construction was wondering if this was a common construction method. I was under the assumption most wheels currently are built up from multiple pieces of laid up carbon fiber sheet.
__________________
Marc Sasso A part of the resin revolution! |
#2
|
|||
|
|||
I wonder if this is the same as the single filament rims from Velocite.
Velicite sells bare rims, and also sells complete wheels under the Venn Cycles brand name. There is a thread about Velocite rims over at the Weight Weenies forum. |
#3
|
||||
|
||||
Thanks Mark, look to be very similar if not the same, will read up the Weight Weenies discussion. Certainly appears to be a more cost effective method of building these plastic wheels, need to research weight, strength and precision claims.
__________________
Marc Sasso A part of the resin revolution! Last edited by m_sasso; 01-20-2017 at 05:56 PM. |
Thread Tools | |
Display Modes | |
|
|