#1
|
|||
|
|||
Campagnolo Chainring Nut/Bolt Tool?
Does anyone make a chainring nut tool that fits the chainring two-piece nuts/bolts, circa 2010? Not the torx bolts, but rather the nuts/bolts that have the slot that one needs to hold while torquing the torx bolts. The Park tool I see online (CNW-2) does not look like it is designed to fit, and using a screwdriver seems a bit dodgy.
These are the chainring nuts I'm talking about. Thanks in advance! |
#2
|
||||
|
||||
What I do for those is put a large flathead screwdriver in my bench vise. Then I tighten the outer bolt with the inner one resting on the screwdriver. Doesnt see a lot of torque once the face of the bolt tightens up against the chainring seat.
__________________
http://less-than-epic.blogspot.com/ |
#3
|
|||
|
|||
That makes sense but, unfortunately, I don't have a bench vise. And none of my screwdrivers are a real good fit.
|
#4
|
|||
|
|||
Short stubby flathead screwdriver won't move around much. Pick one up for a few bucks at your local Ace.
|
#5
|
|||
|
|||
^ +1. ^....short and stubby flathead does the trick
|
#7
|
|||
|
|||
Thanks. I read someone complaining that that it doesn't fit Campag. I wonder if anyone here has tried? There is this similar alternative.
https://www.superbiketool.com/en/pro...k_tool/TB_TH20 |
#8
|
||||
|
||||
Quote:
Teeth aren't tall enough. The teeth on the original Campagnolo tool are about 3mm in height. On this tool they're about 1.5mm. I wonder if I can grind down the body to extend the teeth another 1.5mm...could be a bit tedious with a Dremel tool...
__________________
Colnagi Seven Moots Sampson HotTubes LtSpeed SpeshFat Last edited by C40_guy; 01-17-2024 at 02:23 PM. |
#9
|
|||
|
|||
Circling back to the short and stubby. It'd be pretty easy to file/grind down the edges of a flathead, thus making a centering pin.
|
#10
|
|||
|
|||
Thank you. The Super B doesn't look much better in that regard, so my search continues.
|
#11
|
|||
|
|||
I bought the Park CNW-2 and can confirm that it works without modification.
|
#12
|
||||
|
||||
So does the original Campy tool!
__________________
Colnagi Seven Moots Sampson HotTubes LtSpeed SpeshFat |
#13
|
||||
|
||||
Geez, 11 posts and FINALLY..I have it, works great.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo Last edited by oldpotatoe; 01-22-2024 at 07:32 AM. |
#14
|
||||
|
||||
Um, actually no. It's too wide to fit on Record 10 Compact bolts.
__________________
Colnagi Seven Moots Sampson HotTubes LtSpeed SpeshFat |
|
|