|
Bars in the second picture. Looks like the bar ends are pointed to rear brakes.
The levers appear to be a little low. Use a straight edge that's lined up with the bottom of the bar end. The bottom of the brake lever should be a few mm above the straight edge. If you have the right bend bar, the tops of the hoods should be flat or rising slightly back to front.....better for your wrists.
For Record 11 shifters, I could not deal with Zipp bars so I switched to Thomson Road Bars. Perfect for me.
Last edited by zap; 08-02-2017 at 02:19 PM.
|