Quote:
Originally Posted by ColonelJLloyd
At least in my case this isn't me "buying into" an aluminum freehub body. It was the only choice. It's definitely not why I chose these hubs and I would choose them again. The small strip of steel (bite guard) more or less solves the issue so I don't understand why all aluminum freehubs don't have them.
And the issue is obviously exacerbated by the large torque easily created with a 42-46t rear cog.
BTW, the area around the pawls and springs was greased, but there's certainly room for more. How much grease should they get?
Untitled by ColonelJLloyd, on Flickr
|
Don’t pack pawls with grease, they can stick down, damage the hub or your front teeth. Oil on pawls, I use Mobil 1...doesn’t get thick with the cold.