Quote:
Originally Posted by purplecu22
I pinned my shimano 105 cassettes. If you align the cogs, there is a hole that goes through the entire cassette. I took a 3mm allen key, inserted and cut the end off. I did this on my all cassette bodies and it helped cut down on gouging a great deal.
|
Hmm. 8 of the 10 cogs on this particular cassette were pinned. The 11-42t 11s XT cassette that was on previously and didn't do near the same amount of gouging featured two aluminum carriers for the largest 6 or 7 cogs which certainly goes a long way to prevent gouging.