The Paceline Forum - ti refurbishment

Page 2 of 2

Show 40 post(s) from this thread on one page

The Paceline Forum (https://forums.thepaceline.net/index.php)

- General Discussion (https://forums.thepaceline.net/forumdisplay.php?f=3)

- - ti refurbishment (https://forums.thepaceline.net/showthread.php?t=106323)

mcteague

04-19-2012 12:24 PM

Quote:

Originally Posted by champ (Post 1104484)

Maroon-colored ScotchBrite (fine or extra fine?) is what most frame mfg's use for brushed Ti. +1 on scrubbing around the circumference of the tube.

That is what Seven Cycles sent me when I inquired about what type of pad to use. When I told them I was having a hard time finding the maroon colored one they just sent me two pads. Nice company.

Tim

Ahneida Ride

04-19-2012 01:10 PM

Quote:

Originally Posted by crownjewelwl (Post 1103983)

that's what james uses at black sheep...it is a pretty fine grade

if there is a lot of work, you might start with the maroon then finish with the grey

cut into 1 inch strips and polish away!

i ordered a box of 20...i will never use them all...

PM me and i'll mail a couple to you

Yup .... that works ....

bart998

04-19-2012 05:46 PM

Used to have a DEAN frame and they put a new "Wire Brush" finish and new decals for $100. The bike, which I bought used, was "NEW" looking and gorgeous when it came back. Does Serotta offer a service like this?

All times are GMT -5. The time now is 12:33 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page