Will Sugino 75 Track BB with ISO taper work with Campy Cranks?
I have a cache of campy cranks that take the 111 symetrical spindle
Can I use a Sugino 75 Track BB with ISO taper with Campy Cranks, the centaur square tapers ones that take a 111 spindle, assuming I have chainstay clearance? Thanks D |
As the former owner of a pair of Mavic cranks, I'd recommend against it.
IDK if it was my ham fistedness or the different taper, but I sure-as-shootin cracked that crankarm at the spindle hole. Up to you tho. For a more definitive answer, check Sheldon Brown's site. M |
iso is iso.
but the campy cranks might need a longer bb than the 102/103mm sg75bb to clear the stays? |
There were two taper standards - Campy and Shimano - and I don't recall what taper Sugino used. If you use one type of crank on the other type of spindle things get unhappy.
dave |
sugino 75 cranks use an iso taper.
|
Shimano uses JIS taper.
|
.
|
Quote:
|
Quote:
|
IIRC I've used 108mm BB w/ Sugino 75 and had good chainline using Phil hubs and EAI cogs. At 111 it might be off a bit. There is good info and a few spacing charts here.
|
thanks guys
I appreciate it. The Sugino 75 is ISO, campy style. 109 vs 111 is not a biog deal, I assume it is symetrical.
Thanks |
Quote:
|
Quote:
|
All times are GMT -5. The time now is 01:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.